SPACIUM electrical box
Recommended retail price 2024 starting from :
464 €
Our Price starting from :
464 € Including VAT
Ref. Abatik 007950
Ref. Provider SPAF1PAD
SPACIUM electrical box with trip switch 4-6.3 single-phase Filtration + 1 300 W projector + 1 slave connection
Ref. Provider SPAF1PAD
SPACIUM electrical box with trip switch 4-6.3 single-phase Filtration + 1 300 W projector + 1 slave connection
Electrical box with timeclock
Wall anchoring
Sold with or without trip switch
Wall anchoring
Sold with or without trip switch
In stock
SPACIUM electrical box with trip switch 4-6.3 single-phase Filtration + 1 300 W projector + 1 slave connection
Ref. Abatik 007950 Ref. Provider SPAF1PAD
Ref. Abatik 007950 Ref. Provider SPAF1PAD
464 €
SPACIUM electrical box with trip switch 4-6.3 single-phase Filtration + 2 projectors + 1 slave connection
Ref. Abatik 001660 Ref. Provider SPAF2PAD
Ref. Abatik 001660 Ref. Provider SPAF2PAD
587 €
SPACIUM electrical box with trip switch 6.3-10 Three-phase Filtration + 2 projectors + 2 slave connections
Ref. Abatik 007287 Ref. Provider SPAF2P2AD
Ref. Abatik 007287 Ref. Provider SPAF2P2AD
470 €
SPACIUM Filtration + 1 projector 300W + 2 slave connections
Ref. Abatik 001837 Ref. Provider SPAF1P2AD
Ref. Abatik 001837 Ref. Provider SPAF1P2AD
1065 €
SPACIUM electrical box filtration + brush + 3 projectors without single-phase trip switch
Ref. Abatik 007913 Ref. Provider SPAFB3P
Ref. Abatik 007913 Ref. Provider SPAFB3P
495 €
SPACIUM electrical box + Filtration + 1 projector 300 W + 2 slave connections with trip switch 4-6.3 single-phase
Ref. Abatik 006846 Ref. Provider SPAF1P2AD
Ref. Abatik 006846 Ref. Provider SPAF1P2AD
435 €
SPACIUM electrical box with trip switch 4-6.3 single-phase
Ref. Abatik 001774 Ref. Provider SPAF2PAD
Ref. Abatik 001774 Ref. Provider SPAF2PAD
445 €
SPACIUM electrical box, brush with trip-switch 4-6.3 single-phase
Ref. Abatik 008144 Ref. Provider SPABD
Ref. Abatik 008144 Ref. Provider SPABD
192 €
SPACIUM electrical box, brush, without trip switch
Ref. Abatik 008141 Ref. Provider SPAF
Ref. Abatik 008141 Ref. Provider SPAF
212 €
SPACIUM electrical box, Filtration + 1 projector with trip switch 4-6.3 single-phase
Ref. Abatik 001910 Ref. Provider SPAF1PD
Ref. Abatik 001910 Ref. Provider SPAF1PD
364 €
SPACIUM electrical box , Filtration + 1 projector 300W + 1 slave connection , with trip switch 4-6.3 single-phase
Ref. Abatik 007847 Ref. Provider SPAF1PAD
Ref. Abatik 007847 Ref. Provider SPAF1PAD
293 €
SPACIUM electrical box, Filtration + 1 projector 300W + 2 slave connections, with trip switch 4-6.3 single-phase
Ref. Abatik 008148 Ref. Provider SPAF1P2AD
Ref. Abatik 008148 Ref. Provider SPAF1P2AD
435 €
SPACIUM electrical box, Filtration + 1 projector 300W , without trip switch
Ref. Abatik 001621 Ref. Provider SPAF1P
Ref. Abatik 001621 Ref. Provider SPAF1P
333 €
SPACIUM electrical box, Filtration + 2 projectors ,with trip switch 4-6.3 single-phase
Ref. Abatik 000171 Ref. Provider SPAF2PD
Ref. Abatik 000171 Ref. Provider SPAF2PD
394 €
SPACIUM electrical box, Filtration + 2 projectors 300W + 1 slave depart, with trip switch 4-6.3 single phase
Ref. Abatik 008149 Ref. Provider SPAF2PAD
Ref. Abatik 008149 Ref. Provider SPAF2PAD
585 €
SPACIUM electrical box, Filtration + 2 projectors 300W , without trip switch
Ref. Abatik 001622 Ref. Provider SPAF2P
Ref. Abatik 001622 Ref. Provider SPAF2P
363 €
SPACIUM electrical box, Filtration + 3 projectors with trip switch 4-6.3 single-phase
Ref. Abatik 006853 Ref. Provider SPAF3PD
Ref. Abatik 006853 Ref. Provider SPAF3PD
480 €
SPACIUM electrical box, Filtration + 3 projectors 300W, without trip switch
Ref. Abatik 007831 Ref. Provider SPAF3P
Ref. Abatik 007831 Ref. Provider SPAF3P
474 €
SPACIUM electrical box , Filtration + Brush 1 Projector 300W + 2 slave connections with trip switch
Ref. Abatik 001898 Ref. Provider SPAFB1P2AD
Ref. Abatik 001898 Ref. Provider SPAFB1P2AD
581 €
SPACIUM electrical box , Filtration + Brush + 1 projector 300W + 1 slave connection with trip switch 4-6.3 single phase
Ref. Abatik 008146 Ref. Provider SPAFB1PAD
Ref. Abatik 008146 Ref. Provider SPAFB1PAD
692 €
SPACIUM electrical box, Filtration + Brush + 1 projector 300W + 2 slave connections, with trip switch 4-6.3 single-phase
Ref. Abatik 008147 Ref. Provider SPAFB1P2AD
Ref. Abatik 008147 Ref. Provider SPAFB1P2AD
697 €
SPACIUM electrical box , Filtration + Brush + 1 projector 300W with trip switch 4-6.3 single phase
Ref. Abatik 001620 Ref. Provider SPAFB1PD
Ref. Abatik 001620 Ref. Provider SPAFB1PD
585 €
SPACIUM electrical box, Filtration + Brush + 1 projector 300W without trip switch
Ref. Abatik 007861 Ref. Provider SPAFB1P
Ref. Abatik 007861 Ref. Provider SPAFB1P
465 €
SPACIUM electrical box, Filtration + Brush + 2 projectors 300W + 1 slave connection with trip switch 4-6.3 single phase
Ref. Abatik 008150 Ref. Provider SPAD2PAD
Ref. Abatik 008150 Ref. Provider SPAD2PAD
581 €
SPACIUM electrical box , Filtration + Brush + 2 Projectors 300W + 2 slave connections with trip switch 4-6.3 single-phase
Ref. Abatik 001815 Ref. Provider SPAFB2P2AD
Ref. Abatik 001815 Ref. Provider SPAFB2P2AD
626 €
SPACIUM electrical box , Filtration + Brush + 2 projectors 300W with trip switch 4-6.3 single phase
Ref. Abatik 006931 Ref. Provider SPAFB2PD
Ref. Abatik 006931 Ref. Provider SPAFB2PD
561 €
SPACIUM electrical box, Filtration + Box + 2 projectors 300W , without trip switch
Ref. Abatik 008142 Ref. Provider SPAFB2P
Ref. Abatik 008142 Ref. Provider SPAFB2P
490 €
SPACIUM electrical box, Filtration + Brush + 3 projectors 300W with trip switch 4-6.3 single phase
Ref. Abatik 008145 Ref. Provider SPAFB3PD
Ref. Abatik 008145 Ref. Provider SPAFB3PD
677 €
SPACIUM electrical box, Filtration + Brush + 3 projectors 300W , without trip switch
Ref. Abatik 008143 Ref. Provider SPAFB3P
Ref. Abatik 008143 Ref. Provider SPAFB3P
495 €
SPACIUM electrical box, Filtration with trip switch 4-6.3 single phase
Ref. Abatik 001913 Ref. Provider SPAFD
Ref. Abatik 001913 Ref. Provider SPAFD
246 €
SPACIUM electrical box , Filtration , without trip switch
Ref. Abatik 007342 Ref. Provider SPAF
Ref. Abatik 007342 Ref. Provider SPAF
212 €
SPACIUM electrical box, Filtration 2 Projectors 300W + 2 slave connections with trip switch 4-6.3 single phase
Ref. Abatik 007832 Ref. Provider SPAF2P2AD
Ref. Abatik 007832 Ref. Provider SPAF2P2AD
470 €
Spacium electrical box filtration + 2 projo with trip switch 6,3-10 A
Ref. Abatik 001799 Ref. Provider SPAF2PD
Ref. Abatik 001799 Ref. Provider SPAF2PD
399 €
3 position switch for Spacium electrical box
Ref. Abatik 009819 Ref. Provider INTR PPP
Ref. Abatik 009819 Ref. Provider INTR PPP
31 €
Live connection terminal for Spacium electrical box
Ref. Abatik P17434 Ref. Provider BRGR04
Ref. Abatik P17434 Ref. Provider BRGR04
16 €
The electrical box allows you to command and protect your filtration pump, power and protect your pool projectors. Depending on the chosen model, you can also command and protect other pool equipment, such as booster pumps, electrolysers, dosing pumps etc.
In respect of electrical norms C15-100 the power supply of an electrical box for filtration purposes should be fitted with a 30mA differential switch.
The SPACIUM features a shield protecting electrical modules allowing access to the units trip switch and fuses. Command buttons are situated on the right-hand side.
- Protection index IP55 (resistant to water projections, compatible with a damp environment ).
- Protection of the command circuit (switch and timeclock) with live and neutral circuit breaker.
- Protection of transformer (if a projector is used).
- 230V - 12V transformer (if a projector is used) conform to norm EN61558 - 2 - 6.
- Protected primary circuit with live and neutral circuit breaker.
- 2 25A 12V outlets for the models featuring 2 projectors.
- 3 position switch (Stop, start, automatic) used for filtration.
- 3 position switch (Stop, start, automatic) used for filtration for slave option.
- 2 position switch (On and off) to command projector(s)).
- Earth terminal.
- The slave terminals are used for connecting the command system of automatic treatments (electrolysers, dosing pumps, etc...).
- The mounted trip switches are dual pole for single phase versions and three-pole for three-phased versions.
- For a three phase pump, order the model without trip switch and add the three-pole trip adapted to your pump (see table below).
The command box
Installation of the box :
The command box must be placed in an easy to reach area, that permits correct operation (C15-100 et 771,558), correctly aired, easy access with no obstacles placed in front of the box. The box should be placed between 1m and 1,80m above ground level. Height is limited to 1,30m, taking into account wheelchair access (C15-100 et 771,558). Prohibited in volumes 0,1 and 2. (C15-100 and 702,51). The box should be installed at a minimum distance of 3,50m from the pool and by preference, in the technical shelter.
Command details
1. Timeclock programming
2. Thermal magnetic circuit breaker
3. Projector and pump protection fuses
4. Command switch for filtration
5. Command switch for projectors
6. Contact terminal for eventual slave options
7. Terminal connection for the electrical box power supply 220V (or 380V)
8. Transformer for projector
9. Terminal connection for projectors + ELV protection fuse
Power cables
The cable sections must be dimensioned to support the amperage of the box. The cable length must not cause a voltage drop greater than 5% of the original power source generated (C15-100 section 525). Table 1 shows the values for a copper cable, depending on the dimension of its section, power source, maximum amperage and maximum length for the indicated amperage. The ELV (12V) of the pool : Table 2 shows values for a copper cable section, depending on the power of the transformer and the cable section. The guidelines concerning the ELV cable section, circuit breaker and trip switch dimensions are given in the guide UTE C15-559. In the case of voltage drop, the norm cannot be applied for residential pools as the lifespan of the material will be diminished.
Table indicating amperage to calibrate trip switches
Single-phase installation 230V
Capacity of filtration pump (kW / HP) Calibred trip switch Amperage
0,25 / 0,33 1,6 / 2,5 2,2 A
0,37 / 0,50 2,4 / 4,0 3,12 A
0,55 / 0,75 4 / 6,3 4,76 A
0,75 / 1 4 / 6,3 6,01 A
1,1 / 1,5 6 / 10 7,60 A
1,5 / 2 10 / 16 10,40 A
Three-phase installation 400V
Capacity of filtration pump (kW / HP) Calibred trip switch Amperage
0,25 / 0,33 1,0 / 1,6 0,9 A
0,37 / 0,50 1,0 / 1,6 1,2 A
0,55 / 0,75 1,6 / 2,5 1,60 A
0,75 / 1 1,6 / 2,5 2 A
1,1 / 1,5 2,5 / 4 2,60 A
1,5 / 2 2,5 / 4 3,50 A
2,2 / 3 4 / 6,3 5 A
3 / 4 6 / 10 6,60 A
Security volumes for pools
Security volumes for pools
Electrical installation for pools
Installation schema for electrical box
1. Electrical box 3. Projector
2. Filtration pump 4. Option : Booster pump, dosing pump etc.
In respect of electrical norms C15-100 the power supply of an electrical box for filtration purposes should be fitted with a 30mA differential switch.
The SPACIUM features a shield protecting electrical modules allowing access to the units trip switch and fuses. Command buttons are situated on the right-hand side.
- Protection index IP55 (resistant to water projections, compatible with a damp environment ).
- Protection of the command circuit (switch and timeclock) with live and neutral circuit breaker.
- Protection of transformer (if a projector is used).
- 230V - 12V transformer (if a projector is used) conform to norm EN61558 - 2 - 6.
- Protected primary circuit with live and neutral circuit breaker.
- 2 25A 12V outlets for the models featuring 2 projectors.
- 3 position switch (Stop, start, automatic) used for filtration.
- 3 position switch (Stop, start, automatic) used for filtration for slave option.
- 2 position switch (On and off) to command projector(s)).
- Earth terminal.
- The slave terminals are used for connecting the command system of automatic treatments (electrolysers, dosing pumps, etc...).
- The mounted trip switches are dual pole for single phase versions and three-pole for three-phased versions.
- For a three phase pump, order the model without trip switch and add the three-pole trip adapted to your pump (see table below).
The command box
Installation of the box :
The command box must be placed in an easy to reach area, that permits correct operation (C15-100 et 771,558), correctly aired, easy access with no obstacles placed in front of the box. The box should be placed between 1m and 1,80m above ground level. Height is limited to 1,30m, taking into account wheelchair access (C15-100 et 771,558). Prohibited in volumes 0,1 and 2. (C15-100 and 702,51). The box should be installed at a minimum distance of 3,50m from the pool and by preference, in the technical shelter.
Command details
1. Timeclock programming
2. Thermal magnetic circuit breaker
3. Projector and pump protection fuses
4. Command switch for filtration
5. Command switch for projectors
6. Contact terminal for eventual slave options
7. Terminal connection for the electrical box power supply 220V (or 380V)
8. Transformer for projector
9. Terminal connection for projectors + ELV protection fuse
Power cables
The cable sections must be dimensioned to support the amperage of the box. The cable length must not cause a voltage drop greater than 5% of the original power source generated (C15-100 section 525). Table 1 shows the values for a copper cable, depending on the dimension of its section, power source, maximum amperage and maximum length for the indicated amperage. The ELV (12V) of the pool : Table 2 shows values for a copper cable section, depending on the power of the transformer and the cable section. The guidelines concerning the ELV cable section, circuit breaker and trip switch dimensions are given in the guide UTE C15-559. In the case of voltage drop, the norm cannot be applied for residential pools as the lifespan of the material will be diminished.
Table indicating amperage to calibrate trip switches
Single-phase installation 230V
Capacity of filtration pump (kW / HP) Calibred trip switch Amperage
0,25 / 0,33 1,6 / 2,5 2,2 A
0,37 / 0,50 2,4 / 4,0 3,12 A
0,55 / 0,75 4 / 6,3 4,76 A
0,75 / 1 4 / 6,3 6,01 A
1,1 / 1,5 6 / 10 7,60 A
1,5 / 2 10 / 16 10,40 A
Three-phase installation 400V
Capacity of filtration pump (kW / HP) Calibred trip switch Amperage
0,25 / 0,33 1,0 / 1,6 0,9 A
0,37 / 0,50 1,0 / 1,6 1,2 A
0,55 / 0,75 1,6 / 2,5 1,60 A
0,75 / 1 1,6 / 2,5 2 A
1,1 / 1,5 2,5 / 4 2,60 A
1,5 / 2 2,5 / 4 3,50 A
2,2 / 3 4 / 6,3 5 A
3 / 4 6 / 10 6,60 A
Security volumes for pools
Security volumes for pools
Electrical installation for pools
| Volume | ELV elements used | Appliance used |
| 0 | ELV | ELV |
| 1 | For small pools, a plug socket fitted with a differential circuit breaker superior to 30mA is admitted to more than 1,25m from the pool and lesser than 0,3m from ground level | ELV |
| 2 | ELV separating transformer (installed out of volumes 0, 1, 2). The power source should be protected with a differential greater than 30mA. | ELV separating transformer (installed out of volumes 0, 1, 2). The power source should be protected with a differential greater than 30mA. Class II lighting. |
Installation schema for electrical box
1. Electrical box 3. Projector
2. Filtration pump 4. Option : Booster pump, dosing pump etc.
Warranty
2 years
Photos non-contractual
Price incl. VAT
Price incl. VAT
Ask for a free quote spacium electrical box
Other product : SPACIUM electrical box
Starting from 464 eur Including VAT.
Please fill in this form carefully. Our commercial service will handle your request promptly.
UK freephone hotline
Monday Friday 9.00 18.00
