PANORAMA and MODULO electrical box

The use of an electrical box allows you to command and protect your filtration pump, power and protect your pool projectors. Depending on the chosen model, you can also command and protect other pool equipment, such as booster pumps, electrolysers, dosing pumps etc.

The PANORAMA and MODULO have a protection shield covering the electrical modules, allowing fast access to the trip switch and fuses.

- IP55 envelope (resistant to water projections, compatible with a damp environment ).
- Protection of the command circuit (switch and timeclock) with live and neutral circuit breaker.
- Protection of transformer (if a projector is used).
- 230V - 12V transformer (if a projector is used) conform to norm EN61558 - 2 - 6.
- Protected primary circuit with live and neutral circuit breaker.
- 3 position switch (Stop, start, automatic) used for filtration.
- 3 position switch (Stop, start, automatic) used for filtration for slave option.
- 2 position switch (On and off) to command projector(s)).
- Earth terminal.
- The slave terminals are used for connecting the command system of automatic treatments (electrolysers, dosing pumps, etc...).
- For a three phase pump, order the model without trip switch and add the three-pole trip adapted to your pump (see table below).

The PANORAMA and MODULO models are equipped with a mechanical timeclock that offers program segments of 30 mins.

A CCEI electrical box allows you to :

Optimise pool operation : Power supply, protection and control of electrical equipment : filtration pump, brush, projectors etc.

Peace of mind : Electrical boxes that are practical and conform to security norms.

CCEI guarantee : 35 years of experience, made in France, technical and commercial teams at your service.

User-friendly : Transparent access window offers better visibility to system operations (trip switch, timeclock), Cable entree integrated into casing of the box, ensuring personal and material security, protection of pump via trip switch, transformer conforms to norm NF EN61558.

PANORAMA range

The indicated references refer to a trip switch calabered up to 6,3 A (1 HP single-phase), excepting the models "without trip switch".

MODULO Range

The indicated refrences refer to use with a calabered trip switch up to 6,3A (1HP single-phase), excepting the models "without trip switch".

Cable sections

The cable sections must be dimensioned to support the amperage of the box. The cable length must not cause a voltage drop greater than 5% of the original power source generated (C15-100 section 525).

Table 1 shows the values for a copper cable, depending on the dimension of its section, power source, maximum amperage and maximum length for the indicated amperage. The ELV (12V) of the pool : Table 2 shows values for a copper cable section, depending on the power of the transformer and the cable section. The guidelines concerning the ELV cable section, circuit breaker and trip switch dimensions are given in the guide UTE C15-559. In the case of voltage drop, the norm cannot be applied for residential pools as the lifespan of the material will be diminished.

Table indicating amperage to caliber trip switches

230V single-phase installations

Filtration pump capacity (kW / HP)	Caliber of trip switch	Amperage
0,25 / 0,33	1,6 / 2,5	2,2 A
0,37 / 0,50	2,4 / 4,0	3,12 A
0,55 / 0,75	4 / 6,3	4,76 A
0,75 / 1	4 / 6,3	6,01 A
1,1 / 1,5	6 / 10	7,60 A
1,5 / 2	10 / 16	10,40 A

400V three-phase installation

Filtration pump capacity (kW / HP)	Caliber of trip switch	Amperage
0,25 / 0,33	1,0 / 1,6	0,9 A
0,37 / 0,50	1,0 / 1,6	1,2 A
0,55 / 0,75	1,6 / 2,5	1,60 A
0,75 / 1	1,6 / 2,5	2 A
1,1 / 1,5	2,5 / 4	2,60 A
1,5 / 2	2,5 / 4	3,50 A
2,2 / 3	4 / 6,3	5 A
3 / 4	6 / 10	6,60 A

Electrical installation conditions

Volume	ELV elements used	Appliance used
0	ELV	ELV
1	For small pools, a plug socket fitted with a differential circuit breaker superior to 30mA is admitted to more than 1,25m from the pool and lesser than 0,3m from ground level	ELV
2	ELV separating transformer (installed out of volumes 0, 1, 2). The power source should be protected with a differential greater than 30mA.	ELV separating transformer (installed out of volumes 0, 1, 2). The power source should be protected with a differential greater than 30mA. Class II lighting.

Installation schema for electrical box

Electrical box (1), Filtration pump (2), Projector (3), Slave option : Booster pump, dosing pump (4).

Warranty

2 years