ELECRO VULCAN TITANIUM with mechanical thermostat

ELECRO VULCAN TITANIUM heat exchanger with mechanical thermostat in detail

Outdoor pool water solely heated by the natural energy of the sun, unfortunately, cannot ensure a sufficient temperature to guarantee optimal swimming comfort.

It is why a pool heating solution allows you to obtain a constant pool water temperature throughout the season.

For indoor pools, pool heating is the only way to obtain an ideal temperature for your pool water, whatever the season.

The heat exchanger gives the possibility of using your domestic heating system (gas or oil boiler, heat pump or solar system) to heat your pool water.

The performance of the exchanger is conditioned by the temperature produced by your heating system and the capacity of the exchanger in relation to the volume of pool water.

The exchanger allows you to quickly heat your pool water.

A hydraulic liaison should be fitted between the heating system and the heat exchanger. Only water or water containing a glycol additive are compatible with heat exchangers for pools.

For maximum efficiency, the distance between your heating system and the heat exchanger should be as short as possible to avoid heat loss through piping. If a distance is inevitable, insulation of pipes is recommended.

Features

The ELECRO VULCAN Titanium heat exchanger is an economic solution to heat your pool water in liaison with your domestic heating system. It is equipped with a circulator, mechanical thermostat and flow switch.

- The models featuring a mechanical thermostat TM are equipped with a start/stop button. The mechanical thermostat lets you determine the temperature that you wish for your pool. When the desired temperature is reached, the circulator in the primary circuit stops. These models only operate during the filtration cycle that has been programmed in the electrical box of your filtering unit.

Compatible with salt water treatments.

Pool connection PVC Ø 50 lengthways at filter
Boiler connection Ø1 "BSP
Stainless steel 316 outdoor tube with polyamide supports.
Inside surface of tube TITANIUM, compatible with salt water treatments
Circulator GRUNDFOS.
Palette flow switch.
Non-return valve for primary circuit.
Digital thermostat models MT, 220v..
Full disassembly possible.
Wall or floor anchorage supports

Simplified installation in boiler room, in proximity of boiler, situated at filter outlet

Heating capacity

Model	Maximum volume of pool for primary circuit 90/70°C*	Maximum volume of pool for primary circuit 45/35°C*
25 kW	60 m3	30 m3
40 kW	120 m3	50 m3
70 kW	200 m3	80 m3
100 kW	280 m3	110 m3

Descriptive of the heat exchanger ELECRO VULCAN

Dimensions of the ELECRO VULCAN titanium heat pump


Installation schema for ELECRO VULCAN titanium heat exchanger

Warranty

2 years