Pool equipment Liner and reinforced PVC, sealing material and pool paint Pool paint CTX white pool paint CTX white pool paint
Recommended retail price 2024 :
90 €
Our Price :
90 € Including VAT
Ref. Abatik 023227
Ref. Provider A004113
3L pot white pool paint
Ref. Provider A004113
3L pot white pool paint
Discover our paint specific for pools, offering adherence, fast drying action and excellent covering ability.
In stock
Pool paint for pool concrete structures which are already sealed, acrylic paint which offers excellent resistance to water and chemical agents.
* Excellent adherence
* Excellent resistance to climatical conditions
* Withstands all types of water treatment (soft or salt water)
* Does not favorise the development of algae
* Fast drying
* Excellent covering ability
To use in concrete pool structures (Brut concrete or plastered without the use of silicone additives).
*Theoretical surface covered depends if the surface of the pool structure support that you paint has open pores or not, chosen application mode and volume of dilution
Apply the paint during a dry period, with an outdoor temperature between 5ºC and 35ºC. Avoid painting during the hottest period of the day to avoid paint drying too quickly or blistering.
Mix the paint thoroughly. The surface to paint must be totally dry and clean (mould, algae, limescale deposits, saltpetre, traces of sun protection products).
Tools :
- Brush/Roller : Dilute 5-15% maxi.
- Airless spray guns : Dilute 5-15% maxi.
- Airmix spray gun : Dilute 5-15% maxi.
- Aerographic guns: : Dilute10-20% maxi.
- Turbo basse pression : Dilute 10-20% maxi.
The quality data of our products is based on laboratory studies. We guarantee the best quality of our products on the condition the application recommendations are perfectly respected.
Recent pool builds must have been filled with water for 50 to 60 days before paint is applied. This allows for construction residue and dirt to fully dissolve.
Wash the surface to be painted with hydrochloric acid diluted to 10-15% with water (10:1). Leave to activate 5 minutes, and thoroughly rinse with clear water.
Let the surface dry for 24h to avoid patches of humidity.
Apply the first coat of paint, diluted to 10% followed by 2 or 3 coats of paint applied following the conditions of application outlined above.
Do not apply on surfaces which have an existing synthetic gloss coat, water-repellent concrete or silicone surfaces.
On old surfaces, eliminate all residue with a steel brush or spatula. If there are green or black mould stains, clean with bleach or a solution of water and soda crystals diluted to 10:1 to eliminate sun protection product residue and rinse, thoroughly in clean water.
Let the surface dry for 24h to avoid patches of humidity.
Following application, wait for 8 to 10 days before filling your pool.
Characteristics
* Excellent adherence
* Excellent resistance to climatical conditions
* Withstands all types of water treatment (soft or salt water)
* Does not favorise the development of algae
* Fast drying
* Excellent covering ability
To use in concrete pool structures (Brut concrete or plastered without the use of silicone additives).
Composition
Chemical family
Xylene, toluene
Pigments
Titanium dioxide
Finish
Semi-mat
Colour
White
Density
1,33± 0,05Kg/Litre
Viscosity
120 ± 30SG
D20ºC / 60% H.R
10 to 30 minutes
Drying time at 20ºC / 50% H.R between coats
24 hours
Theoretical surface covered*
5 to 7m²/l*
Drying time required before filling pool
after 7 days
*Theoretical surface covered depends if the surface of the pool structure support that you paint has open pores or not, chosen application mode and volume of dilution
Recommendations for use
Application conditions
Apply the paint during a dry period, with an outdoor temperature between 5ºC and 35ºC. Avoid painting during the hottest period of the day to avoid paint drying too quickly or blistering.
Mix the paint thoroughly. The surface to paint must be totally dry and clean (mould, algae, limescale deposits, saltpetre, traces of sun protection products).
Tools :
- Brush/Roller : Dilute 5-15% maxi.
- Airless spray guns : Dilute 5-15% maxi.
- Airmix spray gun : Dilute 5-15% maxi.
- Aerographic guns: : Dilute10-20% maxi.
- Turbo basse pression : Dilute 10-20% maxi.
The quality data of our products is based on laboratory studies. We guarantee the best quality of our products on the condition the application recommendations are perfectly respected.
On new concrete surfaces :
Recent pool builds must have been filled with water for 50 to 60 days before paint is applied. This allows for construction residue and dirt to fully dissolve.
Wash the surface to be painted with hydrochloric acid diluted to 10-15% with water (10:1). Leave to activate 5 minutes, and thoroughly rinse with clear water.
Let the surface dry for 24h to avoid patches of humidity.
Apply the first coat of paint, diluted to 10% followed by 2 or 3 coats of paint applied following the conditions of application outlined above.
For surfaces which are already painted:
Do not apply on surfaces which have an existing synthetic gloss coat, water-repellent concrete or silicone surfaces.
On old surfaces, eliminate all residue with a steel brush or spatula. If there are green or black mould stains, clean with bleach or a solution of water and soda crystals diluted to 10:1 to eliminate sun protection product residue and rinse, thoroughly in clean water.
Let the surface dry for 24h to avoid patches of humidity.
Following application, wait for 8 to 10 days before filling your pool.
Photos non-contractual
Price incl. VAT
Price incl. VAT
Ask for a free quote ctx white pool paint
Other product : CTX white pool paint
At best price 90 eur Including VAT.
Please fill in this form carefully. Our commercial service will handle your request promptly.
UK freephone hotline
Monday Friday 9.00 18.00
