Aquabot Ultramax Gyro electric pool cleaner

The Aquabot Ultramax Gyro has been specifically designed for the maintenance of public pools. Powerful and resistant, this independent pool cleaner efficiently maintains the bottom surface of your pool in an optimised timespan. Using intelligent Aqua Smart System technology offering 4 cleaning cycles, you can clean the bottom surface of your pool as a whole with a minimum trajectory.

Operation

The Ultramax Gyro from Aquabot is powerful and efficient. Featuring a double pump, the filter flow is 37.7 m³ / hour, rapidly collecting debris and dirt from the pool. The double pump is associated with two traction motors allowing fluid and fast movements. The Ultramax Gyro is equipped with a double rang of wide, foam brushes made from high-density PVA, guaranteeing optimal cleanliness on all pool finishes.

The Ultramax Gyro is delivered with a remote control (1) and control box. (3) Simply connect to power supply (2). Your pool cleaner (5) is connected to the control box using a floating cable (4).



The Aquabot Ultramax Gyro has 4 programs to choose from depending on the dimensions of your pool, the pool's finish and the cleaning cycle desired :

- 3 hours
- 5 hours
- 7 hours
- 9 hours

Each of these cycles is optimised using the Aqua Smart System. This programme assists your unit to clean the pool as a whole, calculating an adapted trajectory. The Aqua Smart System avoids inefficient movements and assures the cleanliness of the bottom surface of the pool without forgotten zones.

How to use your pool cleaner

Before placing your pool cleaner in the water, check that the transformer is not connected to the power supply. The transformer must be placed at a distance of at least 3.6m from the edge of your pool and at least 12cm from ground level.

1) Unroll the floating cable
2) Grasp the unit by it's handle and place it in the water. Use a to and fro movement to evacuate trapped air and let the unit drop to the bottom surface of the pool.
3) Connect the pool cleaner to its transformer.
4) Connect the transformer to the power supply.
5) Define the cleaning cycle using the control panel and switch on. The pool cleaner begins its cycle. Once the cycle is finished the unit automatically goes to standby mode.

The control box

The robot Aquabot Ultramax Gyro is connected to a control box with a LCD display screen. This easy to use control panel allows you to program your pool cleaner and visualise its stage of operation and informs you of the cleaning cycles, total number of worked hours, operational details, eventual abnormalities etc...

The control box

The remote control

The Aquabot Ultramax Gyro is delivered with a wireless remote control permitting control at a distance.

You can also intervene during a cleaning cycle and direct the cleaner to a specific zone requiring attention.

Filter care

Caring for the Ultramax Gyro from Aquabot filter requires little maintenance and manipulation. You can access the filter by removing the lid situated on the undercarriage.If the unit is still in the water ensure that the power supply is disconnected. Gently pull the cable, guiding the unit to the pool-side and remove from water using its handle. Place it on a smooth surface to avoid damage. Unlock and lift off its cover.

Remove the filter from its supporting bars. To clean, rinse in clear water. If you wish, you can wash by machine without detergent.

For your security, before all manipulation ensure the pool cleaner is disconnected from the power supply.

Features

The Aquabot Ultramax Gyro : The Aquabot Ultra 250 : Its ergonomic handle and high-density PVA brushes

Warranty

2 years