VESUVIO TITANIUM electrical pool heater

By means of an independent flow control and offset electrical box coupled with compact dimensions (only 45cm), the range of VESUVIO TITANIUM Electric heaters can be installed in multiple configurations. Their offset electrical box has a maximum range of 1.20m
An electrical heater is the most economic solution when envisaging pool heating. Easy to install and compact in size.

Technical features

Power (kW)	3kW	6kW	9kW	12kW
Amperage (Single-phase version)	13A	26A	40A	-
Power cable sections (Single-phase)*	3x4 mm²	3x6 mm²	3x10 mm²	-
Amperage (Three-phase version)	4,5A	9A	14A	17A
Power cable sections (Three-phase)*	5x2,5 mm²	5x2,5 mm²	5x4 mm²	5x4 mm²
Minimum flow	5m³/h	5m³/h	5m³/h	5m³/h
Maximum flow	30 m³/h	30 m³/h	30 m³/h	30 m³/h
Connection	PVC Ø 63	PVC Ø 63	PVC Ø 63	PVC Ø 63

* Indication for a cable length lesser than 20 metres..

Installation

The electrical heater should be installed on the discharge circuit after the filter and before the chemical treatment system (dosing pump, chlorine management, electrolyser...). The installation of a by-pass is recommended to facilitate eventual maintenance to the heater as well as the winterizing process. When positioning the heater, choose a position that allows access and removal of the resistance to facilitate the evacuation of air locks in the heater body.

Stainless steel immersion heater is not compatible with salt electrolysis treatment.


Dimensions of Vesuvio stainless steel electric heater



Vesuvio installation schema

Warranty

2 years