Material and equipment for your technical shelter Inground and semi-inground technical shelters Ramses inground technical shelter Ramses inground technical shelter
Recommended retail price 2025 starting from :
1865 €
Our Price starting from :
1333 € Including VAT
Ref. Abatik 012273
Ref. Provider 38451TR07501
Ramses-inground technical shelter, cartridge filtration
Ref. Provider 38451TR07501
Ramses-inground technical shelter, cartridge filtration
Technical shelter with integrated filtration sand or cartridge filtration,
for pools up to 55 m3.
for pools up to 55 m3.
In stock
Ramses-inground technical shelter, cartridge filtration
Ref. Abatik 012273 Ref. Provider 38451TR07501
Ref. Abatik 012273 Ref. Provider 38451TR07501
1333 €
Ramses inground technical shelter, sand filtration
Ref. Abatik 007513 Ref. Provider 49578
Ref. Abatik 007513 Ref. Provider 49578
1490 €
Discover the new Ramses inground technical shelter, compatible for all pool types.
The new Ramses inground technical shelter is the solution to a real need : A compact and performant pre-installed filtration group.
The Ramses, can equip pools up to 55 m3 with its reduced dimensions.
This shelter is one of the smallest on the market, occupying a reduced surface area, whilst providing performant filtration at a reduced cost.
Ramses inground technical shelter
The new Ramses inground technical shelter is the solution to a real need : A compact and performant pre-installed filtration group.
The Ramses, can equip pools up to 55 m3 with its reduced dimensions.
This shelter is one of the smallest on the market, occupying a reduced surface area, whilst providing performant filtration at a reduced cost.
Ramses inground technical shelter
1)
1 1/2" top multi-way valve
2)
Sena 1HP pump,11.800l/h, 230 V
3)
550mm diameter Aster filter, 12000l/h, 1 1/2" outlet
4)
PVC pipework
5)
Polymer glass fiber injected technical shelter
Solid
The lateral reinforcements of the Ramses avoids all types of deformation.
Reduced space
The use of a Top valve reduces the shelter dimensions and facilitates manipulation.
Pratical
Pre-installed plumbing, collector and valves for skimmer, main drain and brush adaptor. Discharge by valve, connection to general drain network.
Perfectly watertight
Plumbing connections are mounted and stuck, reducing the risk of leakage.
Technical features
ASTER filter, Diameter 550 mm TOP valve
• Ivory, laminated finish side filter, made from fiber glass and polyester resin.
• Mounted with collectors 1” in diameter and PP and PVC inalterable, plastic material
• Equipped with pressure valve, manual air and water purge
• Six way top valve to selection - filter, wash, back wash, re-circulate purge and close
• Polypropylene base
• Maximum filtration speed : 50 m3/h/m2.
• Maximum working pressure : 2,5 kg/cm2.
• Mounted with collectors 1” in diameter and PP and PVC inalterable, plastic material
• Equipped with pressure valve, manual air and water purge
• Six way top valve to selection - filter, wash, back wash, re-circulate purge and close
• Polypropylene base
• Maximum filtration speed : 50 m3/h/m2.
• Maximum working pressure : 2,5 kg/cm2.
| Diametre (mm) | Height (mm) | Connections (mm) | Flow m3/h à 50m3/h/m² | Sand recharge ( Kg) | Maximum working pressure ( kg/cm2) | Weight (Kg) | Packed volume (m3) |
| 550 | 960 | 50 | 12 | 130 | 2,5 | 20 | 0,36 |
SENA 1 HP single phase pump
Pump hardware stainless steel
Suction and discharge connections 1,5" for a 50mm sleeve
IP-55 motor protection index, class F insulation, allowing operation in humid atmospheres and high temperatures
Pump body in polypropylene reinforced with graphite and glass fiber
NORYL turbine
Mechanical seals in contact with water are made from AISI 316 stainless steel
2 litres pre-filter with transparent lid and bayonet 1/4 turn opening/closing system
Auto-suction greater than 2 m
Low noise level in operation
Suction and discharge connections 1,5" for a 50mm sleeve
IP-55 motor protection index, class F insulation, allowing operation in humid atmospheres and high temperatures
Pump body in polypropylene reinforced with graphite and glass fiber
NORYL turbine
Mechanical seals in contact with water are made from AISI 316 stainless steel
2 litres pre-filter with transparent lid and bayonet 1/4 turn opening/closing system
Auto-suction greater than 2 m
Low noise level in operation
Dimensions
Warranty
2 years on filter
2 years on pump
Photos non-contractual
Price incl. VAT
Price incl. VAT
Ask for a free quote ramses inground technical shelter
Other product : Ramses inground technical shelter
Starting from 1333 eur Including VAT.
Please fill in this form carefully. Our commercial service will handle your request promptly.
UK freephone hotline
Monday Friday 9.00 18.00
Spare parts order
You are looking for a spare part for «Ramses inground technical shelter» ?
Please click the button below. Our commercial service will handle your request promptly.
