Pleco Reaction pool cleaner
Our Price :
Consult us
Ref. Abatik 014086
Ref. Provider 49781C
PLECO REACTION pool cleaner by CTX
Ref. Provider 49781C
PLECO REACTION pool cleaner by CTX
Pool cleaner for above ground pools and pools with flat bottom surfaces with a maximum volume of 60m2
Filter bag with capacity of 30 microns,
2 programs
Filter bag with capacity of 30 microns,
2 programs
Pleco Reaction pool cleaner operates independently from your filtering system.
Collecting dirt and debris in its internal bag without using your pool's filtering system. Very user-friendly, just immerse the pool cleaner in the pool water and switch on the transformer to begin cleaning.
The pleco reaction pool cleaner has been designed to clean flat-bottomed pools with a maximum surface of 60m². This unit remains completely independent from your filter system and requires no modification to your hydraulic circuit.
This cleaner is adapted to all pool shapes, in ground or above ground, and all types of pool finishes (liner, PVC, tiles, fiberglass, painted concrete).
Benefiting from 18m³/h of suction power giving optimal cleaning. The unit is also equipped with an obstacle detector to avoid becoming stuck during trajectory.
The Pleco Reaction does not feature embedded electronics: Everything is managed from the power block.
This pool cleaner is easy to use, just connect the transformer to the power supply and select your cleaning cycle using the integrated timer that allows you to choose the duration of the cycle: 1 hour for everyday cleaning and 2 hours for an intensive clean. Then plunge the cleaner into the pool water and start.
- 1. Connect the floating cable to the transformer.
- 2. Grasp the unit by its handle and place in the pool water.
- 3. With a to and fro movement evacuate trapped air till the cleaner reaches the bottom surface of the pool.
- 4. Choose the desired cleaning cycle with the integrated timer.
- 5. Selection the position ON on the on/off switch and begin cleaning.
- 6. The cleaner is equipped with an automatic stop system at the end of its cycle.
Easy to use Plug & Enjoy
Obstacle detector
Suction power
Water economy and spare parts
Connect to power supply - the cycle begins
Fast access by upper casing
Collecting dirt and debris in its internal bag without using your pool's filtering system. Very user-friendly, just immerse the pool cleaner in the pool water and switch on the transformer to begin cleaning.
The Pleco Reaction pool cleaner in detail
The pleco reaction pool cleaner has been designed to clean flat-bottomed pools with a maximum surface of 60m². This unit remains completely independent from your filter system and requires no modification to your hydraulic circuit.
This cleaner is adapted to all pool shapes, in ground or above ground, and all types of pool finishes (liner, PVC, tiles, fiberglass, painted concrete).
Benefiting from 18m³/h of suction power giving optimal cleaning. The unit is also equipped with an obstacle detector to avoid becoming stuck during trajectory.
The Pleco Reaction does not feature embedded electronics: Everything is managed from the power block.
This pool cleaner is easy to use, just connect the transformer to the power supply and select your cleaning cycle using the integrated timer that allows you to choose the duration of the cycle: 1 hour for everyday cleaning and 2 hours for an intensive clean. Then plunge the cleaner into the pool water and start.
Operation of the pool cleaner
- 1. Connect the floating cable to the transformer.
- 2. Grasp the unit by its handle and place in the pool water.
- 3. With a to and fro movement evacuate trapped air till the cleaner reaches the bottom surface of the pool.
- 4. Choose the desired cleaning cycle with the integrated timer.
- 5. Selection the position ON on the on/off switch and begin cleaning.
- 6. The cleaner is equipped with an automatic stop system at the end of its cycle.
Maintainance of the pool cleaner
- 1. Remove the upper casing of the unit by pressing simultaneously the two black lateral buttons to access the filter bag.
- 2. Take out the bag and rinse in clear water.
- 3. Rinse all the elements of the cleaner.
- 4. Readjust the filter bag placing the soft surface towards the interior and replace in the cleaner.
- 5. Replace the upper casing and close using the locking system.
- 2. Take out the bag and rinse in clear water.
- 3. Rinse all the elements of the cleaner.
- 4. Readjust the filter bag placing the soft surface towards the interior and replace in the cleaner.
- 5. Replace the upper casing and close using the locking system.
The advantages of the pool cleaner
Easy to use Plug & Enjoy
Obstacle detector
Suction power
Water economy and spare parts
Connect to power supply - the cycle begins
Fast access by upper casing
Technical features
Motorisation
Electrical low tension
Compatible pools
Inground or above ground
Pool shapes
Rectangular, Round, Oval or specific shape
Pool finishes
Liner, PVC, tiles, fiberglass, painted concrete
Maximum pool dimensions
10m x 6m or 60m²
Trajectory
Hydraulic propulsion
Cleans
Flat surfaces
Suction power
18m³/h
Filtering capacity
30 microns
Cleaning programs
2 : 1 hour or 2 hours
Stopping system
Automatic at the end of cycle
Length of cable
12m
Filter flow
1575cm³
Dimensions
L45,7 x w50,8 x H22,9cm
Net weight of cleaner
11,3kg
Warranty
2 years
Photos non-contractual
Price incl. VAT
Price incl. VAT
Ask for a free quote pleco reaction pool cleaner
Other product : Pleco Reaction pool cleaner
Please fill in this form carefully. Our commercial service will handle your request promptly.
UK freephone hotline
Monday Friday 9.00 18.00
Spare parts order
You are looking for a spare part for «Pleco Reaction pool cleaner» ?
Please click the button below. Our commercial service will handle your request promptly.
