.jpg "Electric pool cleaners")
PETRA
Recommended retail price 2024 starting from :
9929 €
Our Price starting from :
9929 € Including VAT
Ref. Abatik 024251
Ref. Provider SIGMA-SFILT
PETRA 8,00 x 4,00 m polyester shell pool, depth 1,50 m flat floor without filtration
Ref. Provider SIGMA-SFILT
PETRA 8,00 x 4,00 m polyester shell pool, depth 1,50 m flat floor without filtration
Rectangular polyester shell pool, 8 X 4 m, 1,50 m in depth
2 skimmers, 1 brush adaptor, 1 main drain, 1 projector, 3 discharge nozzles,
Supplied with filtration system,
Pump, sand filter, electric box and PVC plumbing kit
2 skimmers, 1 brush adaptor, 1 main drain, 1 projector, 3 discharge nozzles,
Supplied with filtration system,
Pump, sand filter, electric box and PVC plumbing kit
In stock
PETRA 8,00 x 4,00 m polyester shell pool, depth 1,50 m flat floor without filtration
Ref. Abatik 024251 Ref. Provider SIGMA-SFILT
Ref. Abatik 024251 Ref. Provider SIGMA-SFILT
9929 €
PETRA polyester shell pool 8,00 x 4,00 m, depth 1,50 m, flat floor with filtration system
Ref. Abatik 022056 Ref. Provider RECT8X4-SFILT
Ref. Abatik 022056 Ref. Provider RECT8X4-SFILT
10929 €
Coping kit for PETRA polyester shell pool 8,00 x 4,00 m , depth 1,50 m, flat bottom
Ref. Abatik 022057 Ref. Provider MARGRECT8X4
Ref. Abatik 022057 Ref. Provider MARGRECT8X4
966 €
With a depth of 1.50 m, a length of 8 m and width of 4 m, the PETRA provides a comfortable and agreeable swimming area.
The PETRA polyester shell swimming pool offers an easy solution to obtain an inground pool in your garden.
Installation is simple and easy without the requirement of complicated masonry work.
The PETRA polyester shell pool is reliable, boasting automated manufacturing and excellent resistance and water tightness.
Available colours (viewed as seen in water) :
Blue
White
Beige
Grey
Because you are sure to benefit from a quality choice of materials and a unique automated manufacturing techniques, which are the guarantee of your pool's quality.
Swimming Pool Online and its manufacturer offer the following complete service to professionally position your pool:
- Delivery of the polyester pool shell by the manufacturer (crane truck)
- The qualified drivers check and validate the correct level of the concrete screed using a laser level
- Positioning of the polyester shell in the pool cavity checked and validated using laser level
- Installation of lateral drain (supplied by Client, PVC Ø125 mm, 2 m long)
Almost totally automated, the manufacture of PETRA polyester shell pools is completed in several stages, following a rigorous quality control system.
The PETRA shell is composed of several coatings, guaranteeing a long lifespan and resistance :
1) Automated application of gel-coat : The gel-coat is a resin based material the ensures the protection of the shell.
It also provides the shell colour: White, blue, beige or grey.
2) Automated application of barrier-coat : protective vinylester coating avoiding the risk of osmosis.
3) Application of glass fibre layers: providing better adhesion, this step is carried out manually. The glass fibre layers are applied in the following order - Mat, Tiss-Mat followed by orthophtalic and isophthalic resins.
4) The positioning of reinforcing templates.
5) Projection of stratifying glass strand fibres.
6) Unmolding.
Final step: Assembly of sealing parts (main drain, projector, brush adaptor) and skimmer entry are drilled into the shell structure.
Made from reconstituted stone, rounded in shape, fitting perfectly the contours of your pool. A sheet layout is provided to facilitate installation.
Stone
The positioning of your PETRA pool follows step by step installation:
1) Excavation: Once the 0 level has been defined (reference point for finished work under pool coping), excavate your pool cavity.
ie : for a pool 1.5 m in depth, dig 1.6 m to allow for the concrete screen to be positioned at approximately 10cm high.
2) Screed : the reason for the concrete screed is to level the ground surface before the positioning of the shell to arrive at 0 level. Composed of washed gravel with a granulometry of 6/10 or 6/14.
The required quantity will be evaluated depending on the dimensions of the pool cavity.
3) Delivery of the PETRA pool shell by the supplier.
4) The positioning of the polyester shell pool.
5) Installation of peripheral plumbing and backfill.
6) Hydraulic connections in technical shelter.
7) Concrete belt.
8) Installation of coping and fill your pool : a security system must be put into place before filling your pool Find out more about pool security
Do you have questions concerning the feasibility of your project ? Or one of the above steps? Don't hesitate to contact one of our advisors today!
- Sun exposure
- Protection against dominant wind
- Integration to your outdoor area
- Coherent planning (engine access, crane truck access etc...)
Check with your local authorities if you need to ask for permission to install a pool.
OBLIGED : Equipe your pool with a security system
Equip your PETRA pool with an electrolyser
Equip your PETRApool with a heat pump
Equip your PETRA pool with a counter current unit
The PETRA polyester shell swimming pool offers an easy solution to obtain an inground pool in your garden.
Installation is simple and easy without the requirement of complicated masonry work.
The PETRA polyester shell pool is reliable, boasting automated manufacturing and excellent resistance and water tightness.
The PETRA integrates:
1) Two stairs opposite to one another on one pool width
2) 3 discharge nozzles situated at the level of the stairs
3) 1 brush adaptor
4) 2 skimmers, situated on the pool width, opposite pool stairs
5) 1 wall drain, situated in line to skimmers
6) 1 white lighting projector situated under the skimmers (Colour available on option)
1) Two stairs opposite to one another on one pool width
2) 3 discharge nozzles situated at the level of the stairs
3) 1 brush adaptor
4) 2 skimmers, situated on the pool width, opposite pool stairs
5) 1 wall drain, situated in line to skimmers
6) 1 white lighting projector situated under the skimmers (Colour available on option)
Available colours (viewed as seen in water) :
Blue
White
Beige
Grey
Zoom on polyester shell pools
Why choose a polyester shell pool?
Because you are sure to benefit from a quality choice of materials and a unique automated manufacturing techniques, which are the guarantee of your pool's quality.
Swimming Pool Online and its manufacturer offer the following complete service to professionally position your pool:
- Delivery of the polyester pool shell by the manufacturer (crane truck)
- The qualified drivers check and validate the correct level of the concrete screed using a laser level
- Positioning of the polyester shell in the pool cavity checked and validated using laser level
- Installation of lateral drain (supplied by Client, PVC Ø125 mm, 2 m long)
Composition of your polyester shell
1) Gel Coat : The gel-coat is a resin-based coating that ensures the protection of the shell against osmosis and UV rays.
It also creates the pool shell colour. There is an available choice of white, blue, beige or grey.
2) Barrier Coat : The barrier coat is a protection which is composed of a vinyl ester protective coat, avoiding osmosis.
3) Glass fibre layers: Alternating several types of glass fibres mixed with isophthalic resin (to provide resistance to hydrolysis and excellent mechanical resistance).
The design of the shell is concluded with the simultaneous projection of glass fibres mixed with orthophthalic resin to offer further mechanical resistance.
The application of glass fibre in layers ensures the rigid aspect of the shell.
It also creates the pool shell colour. There is an available choice of white, blue, beige or grey.
2) Barrier Coat : The barrier coat is a protection which is composed of a vinyl ester protective coat, avoiding osmosis.
3) Glass fibre layers: Alternating several types of glass fibres mixed with isophthalic resin (to provide resistance to hydrolysis and excellent mechanical resistance).
The design of the shell is concluded with the simultaneous projection of glass fibres mixed with orthophthalic resin to offer further mechanical resistance.
The application of glass fibre in layers ensures the rigid aspect of the shell.
Focus: The construction of your polyester shell pool
Almost totally automated, the manufacture of PETRA polyester shell pools is completed in several stages, following a rigorous quality control system.
The PETRA shell is composed of several coatings, guaranteeing a long lifespan and resistance :
1) Automated application of gel-coat : The gel-coat is a resin based material the ensures the protection of the shell.
It also provides the shell colour: White, blue, beige or grey.
2) Automated application of barrier-coat : protective vinylester coating avoiding the risk of osmosis.
3) Application of glass fibre layers: providing better adhesion, this step is carried out manually. The glass fibre layers are applied in the following order - Mat, Tiss-Mat followed by orthophtalic and isophthalic resins.
4) The positioning of reinforcing templates.
5) Projection of stratifying glass strand fibres.
6) Unmolding.
Final step: Assembly of sealing parts (main drain, projector, brush adaptor) and skimmer entry are drilled into the shell structure.
Guarantees
10 years capitalised guarantee on manufacturer of polyester shell
10 years on the positioning of the polyester shell into its cavity
10 years capitalised guarantee on manufacturer of polyester shell
10 years on the positioning of the polyester shell into its cavity
Supplied with PETRA
Sealing parts for your pool
1) 2 skimmers
2) 1 main drain
3) 1 brush adaptor
4) 3 discharge nozzles
5) 1 white projector + connection box ( Colours available on option)
2) 1 main drain
3) 1 brush adaptor
4) 3 discharge nozzles
5) 1 white projector + connection box ( Colours available on option)
Elements on option : filtration
Filtration Kit
1) 1 HP filtration pump:
Find out more about the filtration pump
2) 1 CANTABRIC 600 sand filter (6-way valve) + 7 bags of sand :
find out more about the sand filter
3) 1 100 W electrical box, 6.5 at 10 A
Find out more about the filtration pump
2) 1 CANTABRIC 600 sand filter (6-way valve) + 7 bags of sand :
find out more about the sand filter
3) 1 100 W electrical box, 6.5 at 10 A
PVC plumbing kit
1) 1 50 m roll of flexible PVC Ø50 mm
2) 4 Ø50mm valves
3) 4 Ø50 mm T connections
4) 5 Ø50 mm 45° connections
5) 18 90° elbow connections
6) 3 Ø50 mm 1"1/2 male union connections
7) 1 collector, 3 outlets
8) 2 Ø50 mm sleeves
9) 4 m Ø50 mm PVC PN16 piping
10) Tub of blue glue
11) 1 container of solvent
12) 2 rolls of Teflon
2) 4 Ø50mm valves
3) 4 Ø50 mm T connections
4) 5 Ø50 mm 45° connections
5) 18 90° elbow connections
6) 3 Ø50 mm 1"1/2 male union connections
7) 1 collector, 3 outlets
8) 2 Ø50 mm sleeves
9) 4 m Ø50 mm PVC PN16 piping
10) Tub of blue glue
11) 1 container of solvent
12) 2 rolls of Teflon
Maintenance kit
Coping
Made from reconstituted stone, rounded in shape, fitting perfectly the contours of your pool. A sheet layout is provided to facilitate installation.
Stone
Delivery and positioning of pool shell
The positioning of your PETRA pool follows step by step installation:
1) Excavation: Once the 0 level has been defined (reference point for finished work under pool coping), excavate your pool cavity.
ie : for a pool 1.5 m in depth, dig 1.6 m to allow for the concrete screen to be positioned at approximately 10cm high.
2) Screed : the reason for the concrete screed is to level the ground surface before the positioning of the shell to arrive at 0 level. Composed of washed gravel with a granulometry of 6/10 or 6/14.
The required quantity will be evaluated depending on the dimensions of the pool cavity.
3) Delivery of the PETRA pool shell by the supplier.
4) The positioning of the polyester shell pool.
5) Installation of peripheral plumbing and backfill.
6) Hydraulic connections in technical shelter.
7) Concrete belt.
8) Installation of coping and fill your pool : a security system must be put into place before filling your pool Find out more about pool security
Do you have questions concerning the feasibility of your project ? Or one of the above steps? Don't hesitate to contact one of our advisors today!
Technical characteristics
Length
8 m
Width
4 m
Floor
Flat
Depth
1.50 m
Weight
approx 1000 kilos
Volume
approx 39 m³
Swimming Pool Online recommendations: Points to consider when implanting your pool
- Sun exposure
- Protection against dominant wind
- Integration to your outdoor area
- Coherent planning (engine access, crane truck access etc...)
Check with your local authorities if you need to ask for permission to install a pool.
OBLIGED : Equipe your pool with a security system
Equip your PETRA pool with an electrolyser
Equip your PETRApool with a heat pump
Equip your PETRA pool with a counter current unit
Warranty
10 years on shell
2 years on material
Photos non-contractual
Price incl. VAT
Price incl. VAT
Ask for a free quote petra
Other product : PETRA
Starting from 9929 eur Including VAT.
Please fill in this form carefully. Our commercial service will handle your request promptly.
UK freephone hotline
Monday Friday 9.00 18.00
