PAROS

Each model is factory moulded in a monobloc using quality materials : the properties of this manufacturing material proves to offer perfect resistance, watertightness and flexibility of the pool structure.

Each model is a monobloc moulded from polyester resin reinforced with glass fibres, A gel coat (a synthetic resin which gives a "gloss" finish) is then applied.

Using this manufacturing method and quality materials, the pool shell is perfectly watertight.

This type of pool proves to be highly resistant to an aggressive environment (UV, weather conditions, chemical water treatment ...).

PAROS filtration schema

Installation

The SILEN impeller centrifugal pump is self-priming, compact and compatible with salt water treatments and has been designed for the filtration of residential pools.
Supplied with 50 mm union connections on the pump's inlet and outlet, a purge cap, large capacity pre-filter complete with a transparent lid featuring an anti-blocking system.
The SILEN also features internal thermal protection.
The body, floor and diffuser of the pump are made from polypropylene reinforced with glass fibre. Its rotor is made from Noryl® reinforced with glass fibres. Supports are made from polyamide reinforced by glass fibre. The motors axis is made from AISI 420. O-rings from NBR. Mechanical seals made from graphite-alumina. L-2521 aluminium motor body. Bobbin impregnated with epoxy varnish.

• Filters constructed using the simultaneous projection of glass fibres and resin.
• Equipped with collectors and diffusers made from inalterable PVC.
• Manometer, air and water purge supplied.
• 6-way valve to effectuate filtration, wash, rinse, recirculate, purge and close.
• Maximum working pressure 2kg/cm².
• Service pressure 3kg/cm².



Dimensions ASTRAL VESUBIO 500 filter

* Skimmer
* Discharge nozzles
* Main drain
* Brush adaptor

* Reinforcing trusses
* Filter
* Pump
Maintenance kit including wall brush, telescopic handle, floating pipe, net, analysis pouch and manual vacuum