Limpido XC

The Limpido XC salt electrolyser is an automated water treatment system.

Two models are available, XC 60 can manage a pool volume up to 60m3 and XC 100 designed for pools up to 100m3.

This unit is ideal for those who want to enjoy their pools without the constraints linked to water treatment.

When using this system you no longer need to manipulate and store chemical products.

The quantity of chlorine required for water treatment is automatically regulated. This avoids skin and eye irritation due to over chlorination.

The XC features a detector to know when your automatic pool cover is closed, economically adjusting chlorine production depending on water temperature and UV exposure.

Operational system

The front panel of the unit holds all the management and security settings of the electrolyser which are composed of -

4 buttons to program the unit and an LCD 16 character display showing all relevant information.

On/off switch (a), LCD display (b), Program buttons (c).

The Limpido XC uses a cell with massif titanium plates coated with ruthenium oxide ensuring an excellent lifespan.

This cell utilises a temperature sensor adapting chlorine production depending on water temperature.

The Limpido XC uses a flow detector that interrupts operation in the absence of water circulation through
the electrolyser's cell. This feature avoids all risk of hydrogen gas accumulation or overheating of the unit.

The Limpido produces chlorine only during filtration cycles. During chlorine production, there are two stages
- normal and inverted.

These cycles alternate electrode polarity, avoiding limescale deposits and guaranteeing quality chlorine
production and long life for your material.

Following each filtration cycle, the Limpido XC electrolyser stops immediately.
When filtration starts a new cycle, the electrolyser is actioned at the same point at which it was interrupted.

This operating method allows the unit to guarantee an equal production time even in the case of a power cut,
ensuring the best possible descaling of your cell.

This electrolyser requires a by-pass installation on the hydraulic circuit.

Environmentally friendly
- Economical and ecological system reducing the regular use of disinfecting products. You can make economies by means of the adjustment of chlorine production depending on water temperature and the detection of an automatic pool cover.

For the well being of your family
- When using this unit, you no longer need to manipulate chemical treatment products, there is no excess of chlorine avoiding eye and skin irritations.