Gaia WGM pool projector

The Gaïa WGM projectors feature LED technology guaranteeing a long lifespan, generating less heat than a traditional bulb.

Compatible with all types of bulbs, the Gaia WGM projector has been specifically designed to be installed on the pool brush adaptor, preferably, during construction. This range can equally adapt to above ground pools, lacking in a lighting system. Gaïa projectors are equipped with a threaded, 1,5"male connection. A 1,5" / 2" adaptor is equally available on option.
Easy installation, not requiring specific tools.

The WGM range of pool projectors are equipped with a focus especially designed for use in aquatic conditions. This creates an excellent distribution of light in the pool, harmonious and non-blinding during pool use.



The Gaïa WGM diffuses white light. There is equally a coloured range with the following reference : Gaïa WGX30.

Choice of outer casing

The outer casing "dresses" your pool projector. Available in 5 colours :

Transformer capacity

The transformer to which the LED WGM is connected should have a secondary supply of 12v. The power supply should be adequate to the requirements of the projectors to be connected.

The below table indicates the number of projectors that a transformer, depending on its capacity

Installation schema

The projector base uses a 1,5' threaded connection to enable connection to the brush adaptor or discharge nozzle (1) inserted to the wall crossing (2). The power cable passes through the brush adaptor or discharge nozzle and enters a watertight duct leading to the electrical box situated above water level (3).

Warranty

2 years