Belstar
Recommended retail price 2024 starting from :
440.40 €
Our Price starting from :
440.40 € Including VAT
Ref. Abatik 000539
Ref. Provider 51000100
Belstar 50 M pump single-phase water flow 7m3/h
Ref. Provider 51000100
Belstar 50 M pump single-phase water flow 7m3/h
Very low noise level in operation,
Pre-filter with large capacity,
Transparent pre-filter lid,
63mm inlet and outlet
Pre-filter with large capacity,
Transparent pre-filter lid,
63mm inlet and outlet
- Maximum pool volume 90 m3
The BELSTAR range of pumps offer the pallet of new innovations on the market:
- reduced noise level in operation,
- pre-filter with large capacity, equipped with a transparent lid, easy to manipulate by means of its key,
- fast self-priming action.
The majority of components of the BELSTAR are made from reinforced polypropylene, which is insensitive to corrosion. This pump is compatible with salt electrolysis systems with a maximum salt content of 0,7%.
The BELSTAR pumps offer two connection possibilities :
- To be stuck 2", being Ø 63mm (union female connections)
- To be screwed in 2", being Ø 63mm (threaded connections)
- reduced noise level in operation,
- pre-filter with large capacity, equipped with a transparent lid, easy to manipulate by means of its key,
- fast self-priming action.
The majority of components of the BELSTAR are made from reinforced polypropylene, which is insensitive to corrosion. This pump is compatible with salt electrolysis systems with a maximum salt content of 0,7%.
The BELSTAR pumps offer two connection possibilities :
- To be stuck 2", being Ø 63mm (union female connections)
- To be screwed in 2", being Ø 63mm (threaded connections)
Resistance to corosion
The body of the pump and the pre-filter is made from polypropylene, offering excellent resistance to corrosion, even in the case of salt water treatment.
Self-priming
The BELSTAR allows an instant start of the filtration system and the correct operation of pool cleaners using the suction force of the pump.
Dependable mechanical seals
The turbine hub is mounted on a composite protection shaft.
Compatible with salt water
There is no contact between the motor shaft and the pool water, avoiding all corossion. This is an ideal choice in the case of the use of a salt electrolysis system.
The body of the pump and the pre-filter is made from polypropylene, offering excellent resistance to corrosion, even in the case of salt water treatment.
Self-priming
The BELSTAR allows an instant start of the filtration system and the correct operation of pool cleaners using the suction force of the pump.
Dependable mechanical seals
The turbine hub is mounted on a composite protection shaft.
Compatible with salt water
There is no contact between the motor shaft and the pool water, avoiding all corossion. This is an ideal choice in the case of the use of a salt electrolysis system.
Characteristics of the Belstar pump
BELSTAR | 50 | 75 | 100 | 150 | 200 | 250 |
Flow (m3/h) | 7 | 10 | 13 | 16 | 19 | 23 |
Maximum volume of pool (m3) | 25 | 40 | 50 | 60 | 75 | 90 |
Meter water column (mwc) | 10 | 10 | 10 | 10 | 10 | 10 |
Suction/discharge | 2’’ / 2’’ | 2’’ / 2’’ | 2’’ / 2’’ | 2’’ / 2’’ | 2’’ / 2’’ | 2’’ / 2’’ |
Belstar 230V single-phase pumps
BELSTAR | 50 | 75 | 100 | 150 | 200 | 250 |
Power consumed by pump P1 (kW)* 230 V single-phase | 0,58 | 0,69 | 0,97 | 1,20 | 1,30 | 1,70 |
Power available at pump motor shaft P2 (kW)** 230 V single-phase | 0,30 | 0,45 | 0,65 | 0,80 | 1,00 | 1,30 |
Voltage 230 V single-phase - 50Hz | yes | yes *** | yes *** | yes *** | yes *** | yes *** |
Amperage 230 V single-phase - 50Hz | 2,60 | 3,20 | 4,70 | 5,30 | 5,80 | 1,30 |
Weight | 10,7 | 10,8 | 12,2 | 13,7 | 16,4 | 16,5 |
Belstar 400V three-phase pumps
BELSTAR | 50 | 75 | 100 | 150 | 200 | 250 |
Power consumed by pump P1 (kW)* on 400/230 V three-phase | - | - | - | - | 1,32 | 1,65 |
Power available at pump motor shaft P2 (kW)** on 400/230 V three-phase | - | - | - | - | 1,00 | 1,30 |
Voltage 400/230 V three-phase - 50Hz | - | - | - | - | yes | yes |
Amperage 400/230 V three-phase - 50Hz | - | - | - | - | 2,50/4,30 | 3,00/5,20 |
Weight | - | - | - | - | 13,40 | 16,6 |
* P1 = Power consumed by pump.
** P2 = Power available at pump motor shaft
*** These pumps are available in 60Hz
Dimensions in mm
Warranty
2 years
Photos non-contractual
Price incl. VAT
Price incl. VAT
Ask for a free quote belstar
Other product : Belstar
Starting from 440.40 eur Including VAT.
Please fill in this form carefully. Our commercial service will handle your request promptly.
UK freephone hotline
Monday Friday 9.00 18.00
Spare parts order
You are looking for a spare part for «Belstar » ?
Please click the button below. Our commercial service will handle your request promptly.